Installing LabCorp Beacon Patient

LabCorp provides medical laboratory tests and services through a national network of primary clinical laboratories and specialty testing laboratories. Some of your lab work may be done by LabCorp; some, most probably, won’t.

info-iconNotice: LabCorp Website Revised.

May, 2015. The LabCorp website has been revised, requiring some updates to this page. Please check back, soon, for any necessary changes.

The LabCorp Beacon Patient app gives patients access to their LabCorp lab results once they have signed up for a free account.

LabCorp_Beacon_®__1.Patient___Home

The installation of LabCorp Beacon for a PHR in HealthVault varies, depending upon whether its for the primary PHR (e.g., oneself ), a PHR for another family member, or for sharing with a spouse or partner.

LabCorp_Beacon_®__2.Myself

LabCorp_Beacon_®__3.Child_Dependent

LabCorp_Beacon_®__4.ShareSpouse

Once the LabCorp Beacon Patient app has been installed in HealthVault, you can sign in to it from within HealthVault by first clicking on its link (at the lower right of the PHR home page)  and then accessing your test results.


The process of installing a HealthVault app is also a bit involved, so complete the steps, carefully, as you install the Heart360 app in HealthVault.

info-icon Special Note. These are the procedures for installing the LabCorp Beacon app for the primary, i.e. first PHR in HealthVault, and for allowing LabCorp to access the PHR of other persons’ PHR added to the same Healthvault account.

traffic_lightInstalling LabCorp for the primary (initial) person’s PHR.
Complete these steps.
.

  1. Sign in to HealthVault.
  2. Click get some apps. (lower right of Home page)
  3. Type LabCorp in search box.
  4. Click the LabCorp app.
  5. Click Get the app.
    –After which you are on the LabCorp website–
  6. Click Sign up. It’s Free! button.
  7. Click Select One,.
  8. Click Create a new account for myself….
  9. Sign in to the HealthVault for the LabCorp app.
    — You are now ready to  access LabCorp lab reports.

traffic_lightInstalling LabCorp Beacon for another person’s PHR.
Complete these steps. Following this list are screen snapshots for some of them.

  1. Sign in to the HealthVault account.
  2. Click on LabCorp app in the list of installed apps.
    –After which you are on LabCorp website–
  3. Click Add or switch a person.
  4. Click Add a person.
  5. Select the person to add.
  6. Click Continue button.
  7. Click Allow access button.
  8. Click Sign Out and close the window.
    — You now have given LabCorp access to the person’s PHR in HeartVault–
  9. Sign in to HealthVault.
  10. Click Switch  person.
  11. Select the person.
  12. Click  .…’s Apps.
  13. Click LabCorp.
  14. — You are now ready to access health LabCorp lab reports. 

Home_-_HealthVault-2

Screen Shot 2013-08-13 at 10.51.11 AM
LabCorp_Beacon_®__Patient___Overview 2 LabCorp_Beacon_®__Patient___Overview 3 Screen Shot 2013-08-13 at 10.51.11 AM Screen Shot 2013-08-13 at 10.53.29 AM Select_Records_-_HealthVault App_Authorization_-_HealthVault LabCorp_Beacon_®__Patient___Overview copy Home_-_HealthVault-2 copy

6 Responses to Installing LabCorp Beacon Patient

  1. Barney says:

    For most up-to-date news you hav to visit world-wide-web and on the web I found this web page as a most
    excellpent web site for most up-to-date updates.

  2. ask says:

    Thank you, I’ve recently been looking for info about this subject for a long time and yours is the best I
    have came upon so far. However, what concerning the bottom line?

    Are you sure in regards to the source?

    • phr4us2 says:

      Thanks for your query. What, specifically, concerns you (i.e., what do you mean by ‘the bottom line’ and source of what?).

      I will review the contents of the page, revise anything requiring change, and then repost, here, confirming the status.

      – Tom

      • phr4us2 says:

        The lookup table for states allowing patient access to their data is no longer available, so the reference and link have been removed from this page.

  3. V says:

    this is THE MOST CUMBERSOME AND CLUNKY WEB APP that I have used!!
    😒

    • howard schultx says:

      and there appears to be no way to get CCD/CCR versions of test results, They tell you to manually copy .PDF files. That means none of the HealthVault tracking tools are useful unless you type in each test result manually.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s